Stainless M10 x 1.25 steel banjo bolt, coarser thread (1.25) than most brake fittings. See BRA01001 for M10 x 1 banjo bolt for most other brake fittings and models

 2 in stock

Pair of EBC FA018HH double-H sintered brake pads for P2 F08 (P8) calipers, best suited for fast road use. These give better braking but will wear brake discs more quickly than standard EBC pads

For P2 F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers.
With the highest friction rating and a lifetime which is the envy of other Brake Pad Manufacturers, the Double-H pads are now available in a new quieter running, faster bedding formulation. NB if opting for sintered pads use them all round

 2 in stock

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper. Also suitable for some Ducati / Aprilia models.

Caliper seal kit

 2 in stock

Pair of organic EBC FA256 rear brake pads for Hengtong caliper used on 2012 on models

Twin pin fitting. Pre 2012 V7 models use a different brake pad with only one pad pin hole. Also known as Guzzi ref 2R000248

 2 in stock

AP8133798

Protective spring for brake fluid supply line joining rear fluid reservoir to rear brake master cylinder

 2 in stock

 30665860 GU30665860 30 66 58 60
 3066 5860 3066.5860 30.66.58.60

Front brake master cylinder cap and rubber kit for Brembo PS 13 master cylinder. Check the screw holes in your master cylinder are diagnally opposed (as seen top left and bottom right corners when sitting on bike)

Reservoir cap replaces Guzzi ref. 2B001928

 2 in stock

 03661145 GU03661145 03 66 11 45
 0366 1145 0366.1145 03.66.11.45

Rebuild kit for Brembo P32 rear caliper. This is a comprehensive overhaul kit containing replacement dust seals, fluid seals, o ring, bleed nipple, dust cap, washers, brake grease and caliper bolts. One kit required per caliper. Also suitable for some Ducati / Aprilia models.

Caliper seal kit

 2 in stock

Rebuild kit for Grimeca F05 (P5) type calipers with 32mm pistons

This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).

Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model.

 2 in stock

Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function on this auto bleed valve, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover. Fits front calipers only on models listed above.

   2 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder

NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060

 1 in stock